Canon G3 Error Code List page 239

##1300 [ TX ] TCC was received in layer 4
Cause
• Connection for layer 4 (transport layer)
failed.
##1301 [ TX/RX ] TBR was received in layer 4
Cause
• A fault occurred in the communications
procedure for layer 4 (transport layer).
Chapter 2: Service Error Codes
Remedy
• Start a communication once again.
• Print out a communications analysis list,
and analyze it.
Remedy
• Start a communication once again.
• Print out a communications analysis list,
and analyze it.
2-179