Canon G3 Error Code List page 80

Chapter 2: Service Error Codes
##115 [ TX ] During image transmission, the maximum
Cause
• The document is too fine, and coding re-
sulted in a large volume of data.
##116 [ TX/RX ] During a communication, suspension of
Cause
• The other party released the line.
• The exchange malfunctioned.
• The flow of loop current is not adequate.
transmission time per line was exceeded
Remedy
• Using a copying machine, make a copy for
transmission.
• Avoid halftone mode or the like, and use
text mode (binary mode) for transmission.
• Ask the operator of the other party to in-
crease the EOL timer so that the maximum
transmission time per line will not be ex-
ceeded.
loop current was detected
Remedy
• Transmit once again.
• Contact the telephone company.
2-20
[Swiss model]