Canon G3 Error Code List page 243

##1324 [ RX ] CSE was received in the session
Cause
• RSSP was transmitted in the session pro-
cedure for layer 5 (session layer); however,
CSE was received immediately.
##1332 [ TX/RX ] Fault relating to terminal characteristics
Cause
• The terminal characteristics of the other
party was faulty in the document proce-
dure for layer 5 (session layer).
procedure for layer 5
Remedy
• Start a communication once again.
• Print out a communications analysis list,
and analyze it.
occurred in the document procedure for
layer 5
Remedy
• Start a communication once again.
• Match the terminal characteristics with the
other party, and start a communication once
again.
• Print out a communications analysis list,
and analyze it.
2-183
Chapter 2: Service Error Codes