Canon G3 Error Code List page 241

##1320 [ TX/RX ] Fault occurred in the session procedure
Cause
• A fault occurred in the session procedure
for layer 5 (session layer).
#1321 [ TX/RX ] Time-out condition occurred for a
Cause
• The data volume of a single page is too
large, taking more than a specific period
of time for transmission.
• The data volume of a single page is too
large, taking more than a specific period
of time for reception.
• An internal mechanism is faulty.
for layer 5
Remedy
• Start a communication once again.
• Print out a communications analysis list,
and analyze it.
communication of a single page
Remedy
• Reduce the reading resolution, and transmit.
• If the document is too long and the data
volume is too large, make copies using a
copying machine, and transmit in divisions.
• If the document is a halftone document of
a default size and the data volume is too
large, increase the page timer setting.
• Ask the operator of the other party to decrease
the reading resolution for transmission.
• Ask the operator of the other party to di-
vide the document for transmission.
• Increase the page timer setting.
• Ask the other party to find out the cause.
• Correct it by referring to the Service
Manual of the model in question.
2-181
Chapter 2: Service Error Codes