Canon G3 Error Code List page 147

#611 [ TX ] In MF1 (Minifax 1) reception, the absence
Cause
• The line condition is poor, and the image
signal cannot be received correctly.
##612 [ RX ] In MF1 (Minifax 1) reception, the image
Cause
• The line condition is poor, and the image
signal cannot be received correctly.
of CD (Carrier Detect) was detected for 1
sec or more
Remedy
• Ask the operator of the other party to in-
crease the transmission level
image signal may be received correctly.
signal cannot be detected for 5 sec after
transmitting CFR
Remedy
• Ask the operator of the other party to in-
crease the transmission level
image signal may be received correctly.
• Adjust the NL equalizer
age signal may be received correctly.
2-87
Chapter 2: Service Error Codes
[Japanese model]
*1
so that the
[Japanese model]
*1
so that the
*2
so that the im-