Canon G3 Error Code List page 187

##790 [ RX ] In ECM reception, ERR was transmitted
Cause
• The line condition is poor, and the image
signal cannot often be received correctly.
• The machine malfunctioned because of an
echo.
##791 [ TX/RX ] During an ECM mode procedure, a signal
Cause
• The procedure signal is faulty.
after reception of EOR-Q
Remedy
• Ask the operator of the other party to in-
crease the transmission level
image signal may be received correctly.
• Adjust the NL equalizer
age signal may be received correctly.
• Provide echo remedy 2
• Decrease the transmission level
an echo is not received.
other than a significant signal was received
Remedy
• Record the protocol on a DAT or MD, and
have it analyzed by the local Canon office
and/or Technical Center.
2-127
Chapter 2: Service Error Codes
*1
so that the
*2
so that the im-
*7 .
*1 so that