Canon G3 Error Code List page 213

##1057 [ TX/RX ] Bearer capability not authorized
[ TX/RX ] Called terminal not operational
Cause
• Cause number #57 (Bearer capability not
authorized) arrived from the network.
• Cause number #57 (Called terminal not op-
erational) arrived from the network.
##1058 [ TX/RX ] Bearer capability not presently authorized
[ TX/RX ] Call has not been accessed, break down
Cause
• Cause number #58 (Bearer capability not
presently authorized) arrived from the net-
work.
• Cause number #58 (Call has not been ac-
cessed, break down through time-out) ar-
rived from the network.
Remedy
• Check the terms of the contract, and start a
communication once again.
• Print out a communications analysis list,
and analyze it.
• Contact the telephone company or the ex-
change manufacturer to find out the nature
of cause number #57.
• Start a communication once again.
• Print out a communications analysis list,
and analyze it.
• Contact the telephone company or the ex-
change manufacturer to find out the nature
of cause number #57.
through time-out
Remedy
• Check the terms of the contract, and start a
communication once again.
• Print out a communications analysis list,
and analyze it.
• Contact the telephone company or the ex-
change manufacturer to find out the nature
of cause number #58.
• Start a communication once again.
• Print out a communications analysis list,
and analyze it.
• Contact the telephone company or the ex-
change manufacturer to find out the nature
of cause number #58.
2-153
Chapter 2: Service Error Codes
[German model]
[German model]