Canon G3 Error Code List page 240

Chapter 2: Service Error Codes
##1306 [ TX/RX ] Fault occurred for layer 3
Cause
• Connection for layer 3 (network layer)
failed.
• A fault occurred in the communications
procedure for layer 3 (network layer).
##1309 [ TX/RX ] Checkpoint reference number (page
Cause
• At time of transmission, a checkpoint ref-
erence number other than that transmitted
was received.
• At time of reception, a checkpoint refer-
ence number other than that expected was
received.
Remedy
• Start a communication once again.
• Print out a communications analysis list,
and analyze it.
number) after receiving a page signal is
faulty
Remedy
• Start a communication once again.
• Print out a communications analysis list,
and analyze it.
2-180