Canon G3 Error Code List page 244

Chapter 2: Service Error Codes
##1334 [ RX ] Document attribute is faulty
Cause
• The document size of the reception page
was faulty.
• The resolution of the reception page was
faulty.
• The coding method of the reception page
was faulty.
##1336 [ TX/RX ] CSA was received in the session
Cause
• The session procedure stop signal was re-
ceived in the session procedure for layer 5
(session layer). Noise or the like destroyed
the data, causing the no-communication
timer to go ON; or, the Stop button was
pressed, or the memory was found to be
full.
Remedy
• Start a communication once again.
• Print out a communications analysis list,
and analyze it.
procedure for layer 5
Remedy
• Check to find out if the operator of the other
party pressed the Stop button or if the
memory is full; then, start a communica-
tion once again.
• Print out a communications analysis list,
and analyze it.
2-184