Canon G3 Error Code List page 297

Appendix
Bit No.
28 Frame size: (0)=256 octets, (1)=64 octets
29 Reserved
30 Reserved
31 T.6 coding enabled: (0)=Not selected, (1)=Selected
32 Extend field:
(0)=FIF is up to this bit, (1)=FIF is extended by 8bits after this bit
33 Field not valid capability: (0)=Not selected, (1)=Selected
34 Set to "0"
35 Set to "0"
36 T.43 coding: (0)=Not selected, (1)=Selected
37 Plane interleave: (0)=Not selected, (1)=Selected
38 Voice coding with 32 kbps ADPCM (Rec.G.726):
(0)=Not selected, (1)=Selected
39 Reserved for the use of extended voice coding
40 Extend field:
(0)=FIF is up to this bit, (1)=FIF is extended by 8bits after this bit
41 R8x15.4lines/mm: (0)=Not selected, (1)=Selected
42 300x300pels/25.4mm: (0)=Not selected, (1)=Selected
43 R16x15.4lines/mm and/or 400x400pels/25.4mm:
(0)=Not selected, (1)=Selected
44 Resolution type selection:
(0)=metric-based resolution, (1)=inch-based resolution
45 Don't care
46 Don't care
47 Set to "0"
48 Extend field:
(0)=FIF is up to this bit, (1)=FIF is extended by 8bits after this bit
49 Subaddressing transmission: (0)=Not selected, (1)=Selected
50 Sender Identification transmission: (0)=Not selected, (1)=Selected
51 Set to "0"
52 Reserved
53 Binary File Transfer (BFT): (0)=Not selected, (1)=Selected
54 Document Transfer Mode (DTM): (0)=Not selected, (1)=Selected
55 Electronic Data Interchange (EDI): (0)=Not selected, (1)=Selected
56 Extend field:
(0)=FIF is up to this bit, (1)=FIF is extended by 8bits after this bit
57 Basic Transfer Mode (BTM): (0)=Not selected, (1)=Selected
58 Reserved
Meaning/Function
A-20