Canon G3 Error Code List page 262

Chapter 2: Service Error Codes
##1415 [ TX ] RSTWN was received in the session
Cause
• A fault occurred in the session procedure
for layer 5 (session layer) on the receiving
machine.
##1416 [ TX ] Received RSTWP is faulty
Cause
• RSTWP was received, but the nature of the
signal is faulty.
procedure for layer 5
Remedy
• Start a communication once again.
• Print out a communications analysis list,
and analyze it.
Remedy
• Start a communication once again.
• Print out a communications analysis list,
and analyze it.
2-202