Canon G3 Error Code List page 27

Chapter1: User Error Codes
#025 [ TX/RX ] Auto-dial setting is wrong
Cause
• The settings require registration of a
subaddress for auto-dialing; however, a call
was attempted without registering a
subaddress.
• Minifax mode was selected for auto-dial-
ing, and an attempt was made for polling
reception.
• Minifax mode was combined with a confi-
dential or relay setting for auto-dialing, and
an attempt was made for transmission.
• A confidential setting and a relay setting
were combined for auto-dialing, and an
attempt was made for transmission.
#027 [ RX ] LBP (printer) is OFF
Cause
• The LBP is OFF.
Remedy
• If auto-dialing is of a type requiring regis-
tration of a subaddress, register a subadd-
ress.
• Make correct auto-dial settings.
[exclusively for L910]
Remedy
• Turn on the LBP.
1-14