Canon G3 Error Code List page 41

Chapter1: User Error Codes
#055 [ TX ] The other party does not have an MDC
Cause
• Although an attempt was made to transmit
an image from a PC, the other party is not
equipped with an MDC function.
#056 [ RX ] Recording paper feed fault
Cause
• The recording paper has jammed while
both pickup sensor and delivery sensor
were OFF.
(Multi Device Controller) function
Remedy
• Transmit a printed document instead of a
• Transmit to a party equipped with an MDC
• Ask the operator of the other party to set
Remedy
• Remove the jammed recording paper from
1-28
[exclusively for GP55]
coded image from a PC.
function.
up the MDC function.
the feeding section.