Canon G3 Error Code List page 156

Chapter 2: Service Error Codes
##707 [ TX ] In CHT transmission, a transmission speed
Cause
• The procedure signal is faulty.
##710 [ TX ] In CHT transmission, a response cannot
Cause
• The line condition is poor, and the other
party cannot receive the image signal or
RR correctly.
request error occurred in relation to NSC
Remedy
• Record the protocol on a DAT or MD, and
have it analyzed by the local Canon office
and/or Technical Center.
be received after transmission of image
data and the allowed number of RR
transmissions has been exceeded
Remedy
• Increase the transmission level
other party may receive the image signal
or RR correctly.
• Decrease the transmission start speed.
• Adjust the NL equalizer
party may receive the image signal or RR
correctly.
2-96
*1
so that the
*2
so that that other