Canon G3 Error Code List page 48

#101 [ TX ] Call cannot be made
Cause
• The polarity of L1 and that of L2 of the
line do not match.
#102 [ TX/RX ] Subaddress or password does not match
Cause
• The subaddress and the password of the
machine do not match that of the other
party.
• An appropriate subaddress and password
are not set on the other party.
• In the case of transmission, the image
memory of the party is full.
Remedy
• Reverse L1 and L2 of the line.
during an ITU-T-compliant subaddress
communication
Remedy
• Match the subaddress and password of the
• Ask the operator of the other party to set
• Ask the operator of the other party to de-
1-35
Chapter1: User Error Codes
machine with those of the other party.
an appropriate subaddress and password.
lete image data that is no longer needed,
and transmit once again.