Canon G3 Error Code List page 247

##1341 [ TX ] RDPBN was received in the document
Cause
• A fault occurred between pages while in
transmission.
##1348 [ TX/RX ] Fault occurred in the document procedure
Cause
• A fault occurred in the document proce-
dure for layer 5 (session layer).
procedure for layer 5
Remedy
• Start a communication with the page for
which the error occurred.
• Print out a communications analysis list,
and analyze it.
for layer 5
Remedy
• Start a communication once again.
• Print out a communications analysis list,
and analyze it.
2-187
Chapter 2: Service Error Codes