Canon G3 Error Code List page 62

Chapter 2: Service Error Codes
##003 [ TX ] In G2 transmission, MCF2 or PIS cannot be
Cause
• The line condition is poor, and the other
party cannot receive PIS correctly.
• The line condition is poor, and MCF2 from
the other party cannot be received correctly.
##004 [ RX ] In G2 reception, EOM or PIS cannot be
Cause
• The line condition is poor, and the image
signal is not received for 1 sec or more.
(However, the 1st 5 sec immediately after
image reception operation is ignored.)
received
Remedy
• Increase the transmission level
other party may receive PIS correctly.
• Adjust the NL equalizer
party may receive PIS correctly.
• Ask the operator of the other party to in-
crease the transmission level
MCF2 may be received correctly.
• Adjust the NL equalizer
may be received correctly.
received
Remedy
• Ask the operator of the other party to in-
crease the transmission level
or PIS may be received correctly.
• Adjust the NL equalizer
PIS may be received correctly.
2-2
*1
so that the
*2
so that the other
*1 so that
*2
so that MCF2
*1
so that EOM
*2
so that EOM or