Table of Contents
Advertisement
394
Creating telephone records with the Add Users Wizard
Changing button programming in the wizard
The button programming section of the wizard only appears if a specific type of telephone has
been specified in the wizard or template. The changes you make to this table will overwrite any
existing programming for these telephones connected to the ports associated with the DN records
that you are changing with this wizard.
Line buttons, Answer DN, buttons, intercom buttons, and Hunt group designators cannot be
reconfigured by the user at the telephone. They also appear as read-only fields in this table, since
they are assigned to the buttons in other places. Feature and auto dial can be reconfigured by the
user, if they have privileges to change memory buttons
on page
453).
1
In the wizard, open the list beside the button you want to program.
2
Choose the action that you want to program onto the button.
•
If you choose Blank, any existing programming on that button will be erased and the
button will be empty. Use this setting for the buttons where you want to allow the user to
indicate speed dial codes or other user-specific options.
•
If you choose Feature, you will be presented with a list of all the available features. Refer
to
"Button programming features" on page 853
Figure 120 Feature selection
•
If you choose Internal Autodial, you will be prompted to choose the DN of the telephone
that will be dialed.
Figure 121 Internal autodial selection
•
If you choose External Autodial, you will be prompted to choose the route the dialout
will take. In the third field, enter the external dialed number.
N0008589 3.3
("Defining telephone dialing restrictions"
for descriptions of the available features.
Advertisement
Table of Contents
