Pri Line Pools; Figure 109 Pri Overlap - Nortel BCM 3.7 Manual

354 Configuring Call by Call services

Figure 109 PRI Overlap

Note: If more than one PRI and its channels are in the same PRI Pool,
the administrator must change the Maximum outgoing value to reflect
the total number of channels available. For example:
1 PRI: Maximum outgoing = 30
2 PRI: Maximum outgoing = 60
3 PRI: Maximum outgoing = 90

PRI line pools

All lines in a PRI interface are in the same PRI line pool. This pool cannot contain any non-PRI
lines. There is one PRI pool available for each PRI interface. Depending on the order that the
modules are configured as PRI, Pool PRI-A represents lines 061 to 083, Pool PRI-B represents
lines 085 to 107, and Pool PRI-C represents lines 109 to 131, etc. to Pool PRI-F. If all PRIs are
connected to the same service provider and use the same protocol, lines 061 to 083, 085 to 107,
and 109 to 1311 etc. can be put in the same pool, PRI-A, PRI-B, PRI-C up to PRI-F.
N0008589 3.3