Table of Contents
Advertisement
Table 93 Telco features settings (Continued)
Setting
Available log space
(read only)
Legacy DECT system note: DECT handsets display numbers for incoming calls from outside the
local network, and displays the telephone name for incoming calls from internal sets.
Voice Mail settings
Systems with voice mail have an additional screen that can be used to change the display and
outdial for the voice mailbox for each telephone.
Note: This screen is generated when you use the Add Users Wizard to configure DNs. The DN
must appear under the Active DNs heading before this screen appears.
1
Click on the keys beside Services, Telephony Services, System DNs, Active set DNs.
2
Click on the DN you want to set voice mail parameters for (DNXXX).
The Voice Mail screen appears in the right frame.
3
Use the information in the following table to change the Voice Mail display features.
Table 94 DN voice mail settings
Setting
Last name
First name
Display in directory
Outdial type
Deleting a mailbox
If you want to delete the mailbox for this DN: On the top menu, click Configuration and select
Delete.
Values
Description
<total amount of log
This setting indicates the total amount of space available for call
space that is
logging on the system.
available>
Values
Description
<alphanumeric>
Last name of the person who owns the mailbox
<alphanumeric>
First name of the person who owns the mailbox.
Yes or No
Indicates whether this name will display in the company directory.
None, Line, Pool,
Indicates how the outdial occurs to reach the mailbox.
Route
Hint: If your voice mail system is physically attached to another
system on the network, you need to indicate an external path (line,
pool, or route).
Voice Mail settings
Programming Operations Guide
457
Advertisement
Table of Contents
