Configuring Dns For System Devices - Nortel BCM 3.7 Manual

Chapter 15

Configuring DNs for system devices

This section describes, in detail, the DN record screens that are used for configuring the telephones
and equipment attached to the station modules on the Business Communications Manager
screen-by-screen.
Refer also to the process map
The Programming Records contain a number of forms for telephone programming. If you fill those
forms out beforehand, you can easily create the templates and programming described in this
section.
Task: To set up each telephone or device attached to your system:
• Copy settings from existing records:
• Configure each telephone record individually):
— Define the unique name for the telephone.
— Assign lines or line pools to each telephone.
— Determine the Capabilities and User Preferences for each telephone, if
— Determine the restrictions for each telephone.
• Determine the call display and log options.
• If you have optional voice mail active on your set, you will also see the active phone number
for each telephone.
• If your attendants have 7316E+eKIM telephones, you need to assign these systems under
"Setting up CAP stations" on page
("Understanding the configuration process" on page
("Identifying the telephone (General heading)" on page
("Configuring line access" on page
applicable. ("Defining device capabilities" on page
preferences" on page 428,
"Configuring user speed dialing" on page
DNs" on page 452)
("Voice Mail settings" on page
446.
"Copying settings to other DNs" on page 401
405)
"Programming telephone buttons" on page
444)
("Configuring telco features" on page
457).
366).
403).
417, "Defining user
("Programming restrictions for
456)
Programming Operations Guide
399
432,