Network Name Display - Nortel BCM 3.7 Manual

Business Communications Manager supports the following ISDN services and features offered by
ISDN service providers:
• D-channel packet service (BRI only) to support devices such as transaction terminals.
Transaction terminals are used to swipe credit or debit cards and transmit the information to a
financial institution in data packets.
• Calling number identification (appears on both Business Communications Manager sets and
ISDN terminal equipment with the capability to show the information)
• Multi-Line hunt or DN hunting which switches a call to another ISDN line if the line usually
used by the Network DN is busy. (BRI only)
• Subaddressing of terminal equipment (TE) on the same BRI loop. However, terminal
equipment which supports sub-addressing is not commonly available in North America. (BRI
only)
Transmission of B-channel packet data using nailed up trunks is not supported by Business
Communications Manager.
Contact your ISDN service provider for more information about these services and features. For
more information about ordering ISDN service in North America, see
page 868 and "Ordering ISDN BRI" on page
The terminal equipment (TE) connected to the Business Communications Manager system can use
some feature codes supported by the ISDN service provider.

Network name display

This feature allows ISDN to deliver the Name information of the users to those who are involved
in a call that is on a public or private network. For information about programming this feature, see
"Network name display" on page
Your Business Communications Manager system displays the name of an incoming call when it is
available from the service provider. If the Calling Party Name has the status of private it may be
displayed as
Private name
displayed. If the Calling Party Name is unavailable it may be displayed as
Your system might display the name of the called party on an outgoing call, if it is provided by
your service provider. Your system sends the Business Name concatenated with the set name on
an outgoing call but only after the Business Name has been programmed.
The available features include:
• Receiving Connected Name
• Receiving Calling Name
• Receiving Redirected Name
• Sending Connected Name
• Sending Calling Party Name
Services and features for ISDN BRI and PRI
868.
461.
if that is how the service provider has indicated that it should be
"Ordering ISDN PRI" on
Unknown name
Programming Operations Guide
861
.