Table of Contents
Advertisement
Configuring the PPP User List
You can restrict access to the network using the PPP User List. Business Communications
Manager uses the information on this list to verify and confirm the identity of the user. Only those
users whose names appear on the PPP User List can access the network. The PPP User List
configuration allows you to add, modify or delete an item on the list.
Adding an interface to the PPP User List
To add an item to the PPP Password List:
1
On the navigation tree, click the Resources key and click the UTWAN heading.
The Resources screen appears.
2
Click the UTWAN1 heading.
The Summary screen appears.
3
Click the PPP User List tab.
The PPP User List screen appears.
4
On the Configuration menu, click Add PPP User&Password.
The Interface List dialog box appears.
5
Configure the PPP User List parameters according to the following table.
Table 27 PPP User parameters
Attribute
Description
Entry (PP#)
Enter the PPP User identifier.
The Entry number uniquely identifies an user on the PPP User List. The value for this setting
must follow certain conventions. You must type the prefix 'PP' followed by a unique number
identifying the PPP User. For example, 'PP2' is a valid name. If you specify an existing Entry
number, you receive an error message. If you use non-sequential numbers the system
automatically reassigns sequential numbers. The Entry number does not have any significance,
other than uniquely identifying a PPP User.
Interface Name
Enter the name for the interface. This is the name that is used to identify this specific interface.
Host Name
Enter a name for the remote host.
The host name can be up to 32 characters in length.
PPP User Name
Enter the user name associated with the computer you want Business Communications
Manager to identify as a valid network user.
The User Name can be up to 32 characters in length.
You must overwrite the default user name User with the user name you want to add to the list.
PPP Password
Enter the password you want to assign to the user defined in the PPP User Name box. The
password can contain a combination of lowercase and uppercase letters and numbers.
The Password can be up to 32 characters in length.
Universal T1 WAN (UTWAN)
Programming Operations Guide
185
Advertisement
Table of Contents
