Figure 184 Network call redirection path
Telephone A
Original call
Call forwarded to Meridian Mail
If you are using the centralized voice message system from a Meridian 1 system, you require the
following programming on the M1:
M1 programming in LD 17
•
NASA set to Yes
•
NCRD set to Yes
Verifying NASA is Active
•
Overlay 22, LD 22
•
REQ: PRT
•
TYPE: ADAN DCH (slot number)
•
NASA should be set to yes
If NASA is not on:
Verifying NCRD
•
Overlay 20, LD 20
•
REQ: PRT
•
TYPE: TIE
•
CUST: 0
•
Route: Enter the route defined in LD 20
•
Keep pressing enter until all values are
displayed. Check if NCRD is yes.
Business Communications Manager
Disable the D channel
•
Overlay 96, LD 96
•
REQ: CHG
•
TYPE:DISDCH
Understanding MCDN network features
Meridian 1
with Meridian Mail
SL-1 MCDN
Telephone B
Disable the loop
•
Overlay 60, LD 60
•
REQ: CHG
•
TYPE: DISL (slot
number)
If NCRD is set to no
•
Overlay 16, LD 16
•
REQ: CHG
•
TYPE: RDB
•
CUST: 0
•
ROUT: (route number) from LD 20
•
Keep pressing enter until you get NCRD and type Yes
•
Keep pressing enter until you get the REQ prompt
again
•
TYPE: end
Programming Operations Guide
Program the D channel
•
Overlay 17, LD 17
•
REQ: CHG
•
TYPE: ADAN
•
ADAN: CHG DCH (slot
number)
•
Keep pressing enter until
you get to NASA
•
TYPE: yes
•
TYPE: end
533