Table of Contents
Advertisement
662
Configuring a DHCP Relay Agent
Configuring a DHCP Relay Agent
If you chose DHCPRelayAgent as the mode, configure the DHCP Relay Agent settings in the
Global Options and Server List screens with the following process.
1
On the navigation tree, click the Services key and click the DHCP heading.
The DHCP Mode screen appears.
2
Click the Global Options tab.
The Global Options screen appears.
3
Click the Log Level box and choose which information is recorded in the system admin log.
Errors Only - records error messages only
Warnings Also - records error message and warning messages
Maximum - records error message, warning messages and event messages
Disabled - disables recording of DHCP messages
The default is Errors Only.
4
Click the Server List tab.
The Server List screen appears.
5
On the Configuration menu, click Add server.
The Server List dialog box appears.
6
Type in the IP address of the DHCP server.
Note: You can specify a number of servers. The routing component searches the list for
the server on the same subnet as the interface and forwards the DHCP packet.
7
Click the Save button.
Deleting a server from the Server List
1
On the navigation tree, click the Services key and click the DHCP heading.
The DHCP Mode screen appears.
2
Click the Server List tab.
The Server List screen appears.
3
Click a server in the Server List.
4
On the Configuration menu, click Delete server.
A dialog box appears asking you to confirm the deletion.
5
Click the Yes button.
N0008589 3.3
Advertisement
Table of Contents
