390
Creating telephone records with the Add Users Wizard
Table 74 Add Users wizard information (Continued)
•
Do you want to be able to answer a voice call without
lifting the receiver or pressing the handsfree button on
the telephone?
•
Do you want to include this telephone into a pickup
group?
•
Which Page zone do you want this telephone to be in?
•
Do you want to allow the user of this telephone to access
the Paging feature?
•
Which telephone, if any, do you want the telephone to
dial when the direct dial number is entered on this
telephone?
•
Do you want the user to be able to use the Priority call
feature?
•
Do you want an active call to automatically be put on
hold when another call comes in and is picked up?
•
Do you want this telephone to have access to an auxiliary
ringer?
•
Do you want to allow the line to be redirected?
•
Do want redirected lines to ring at this telephone?
•
Are you programming an analog telephone or a
telephone attached through an ATA2 device?
Screen 6, Call Forward/Hotline
Refer to
"Assigning Call Forward" on page 421
•
If the call is not answered, where do you want to forward
it to? (i.e. voicemail DN)
•
How long do you want forward to delay on a call that is
not answered? Note: This field appears after you enter a
DN into the Forward no answer field.
•
If the telephone is busy, where do you want to forward
the call? (i.e. voicemail DN)
•
CallPilot Messaging DN (F985)
•
Do you want the telephone to have access to a Hotline
number? Refer to
If internal . . .
What is the internal number for the hotline?
If external . . .
What route do you want the telephone to use to access
the external number?
N0008589 3.3
"Assigning a Hotline" on page
(HF Answerback) No/Yes
(Pickup group)
None or Group: 1- 9
(Page zone) None or Zone: 1-6
(Paging) No/Yes
(Direct dial)
None or Set: 1-5
(Priority Call) No/Yes
(Auto hold) No/Yes
(Aux ringer) No/Yes
(Allow redirect) No/Yes
(Redirect ring) No/Yes
(Receive short tones)
No/Yes
and
"Assigning a Hotline" on page
(Forward no answer to)
(Forward no answer delay)
2, 3, 4, 6, 10
(Forward on busy to)
<DN number> (read-only)
(Type)
423.
None, Internal, External
(Internal #)
(Facility)
Use prime line, Use routing table
Use <assigned line>, <assigned line pool>
423.