Using Hunt Group Metrics - Nortel BCM 3.7 Manual

Using Hunt group metrics

The Hunt Group Metrics tables are located under Diagnostics, Service Metrics in the Unified
Manager. Each Hunt group has a separate listing of group data that gives you a quick overview of
activity and potential trouble spots.
To access these screens:
1
Click on the keys beside Diagnostics, Service Metrics, and Hunt Group Metrics.
2 Click on the Hunt group you want to observe.
As shown in the figure below, the Hunt group XX screen appears, where XX is the hunt group
number.
Figure 207 Hunt Group Metrics screen for Hunt group 01
All the fields are read-only, however you can reset the statistics by clicking on Clear Group
which is found under the Configuration menu item.
Monitoring Hunt groups
Programming Operations Guide
591