Table of Contents
Advertisement
Modifying a Branch Office IPSec Tunnel
1
On the navigation tree, click the Services key and click the VPN key.
2
Click the IPSec key and click the Branch Office Accounts key.
3
Click the tunnel you want to modify.
The Tunnel Parameters screen appears.
4
Change the required IPSec Tunnel settings.
For information about the settings refer to
774.
5
Click the Tab key to save your changes.
Modifying Local Accessible Networks to the Branch Office IPSec tunnel
1
On the navigation tree, click the Services key and click the VPN key.
2
Click the IPSec key and click the Branch Office Accounts key.
3
Click the tunnel you want to modify.
The Tunnel Parameters screen appears.
4
Click the Local Accessible Networks tab.
The Local Accessible Networks screen appears.
5
Click the Local Accessible Network you want to modify.
6
On the Configuration menu, click Modify Local Accessible Network.
7
Modify the Local Accessible Network parameters.
8
Click the Save button.
Modifying Remote Accessible Networks to the Branch Office IPSec tunnel
1
On the navigation tree, click the Services key and click the VPN key.
2
Click the IPSec key and click the Branch Office Accounts key.
3
Click the tunnel you want to modify.
The Tunnel Parameters screen appears.
4
Click the Remote Accessible Networks tab.
The Remote Accessible Networks screen appears.
5
Click the Remote Accessible Network you want to modify.
6
On the Configuration menu, click Modify Remote Accessible Network.
7
Modify the Remote Accessible Network parameters.
8
Click the Save button.
"Adding a Branch Office IPSec Tunnel" on page
Programming Operations Guide
IPSec
779
Advertisement
Table of Contents
