Configuring A Dhcp Server; Table 156 Dhcp Server Summary Attributes - Nortel BCM 3.7 Manual

Configuring a DHCP Server

If you chose DHCPServer as the DHCP mode, configure the DHCP Server settings in the Global
Options and Summary screen.
1 On the navigation tree, click the Services key and click the DHCP heading.
The Summary screen appears.
2 Configure the DHCP Server Summary attributes according to the following.

Table 156 DHCP Server Summary attributes

Setting Definition
Description Displays a description of the DHCP service.
This is a read-only field.
Version Displays the version number of the DHCP service.
This is a read-only field.
Status Allows you to view and change the status of the DHCP Server.
To enable DHCP Server, select Enabled.
To disable DHCP Server, select Disabled.
When the DHCP Server is running, the status is Up.
When the DHCP Server is not running, the status is Disabled.
3
Click the Global Options tab.
The Global Options screen appears.
Configuring a DHCP Server
Programming Operations Guide
643