Figure 102 Adding a destination code with a wild card
5
Click the Save button to save the destination code.
Set up the destination code schedules
1
Click on the key beside Schedules.
2
Click on the schedule name you want to
program. For example: Normal.
3
Choose the Use route you want the
destination code to refer to during
operation of the schedule.
4
In Absorb Length, choose a number to
define which part of the destination code
will be ignored by the system when it
dials out.
Programming note: All schedules
except Normal allow you to specify up to
three routes, to allow for fallback.
5
Click outside the window to save the
changes.
Configuring destination codes with wild cards
Programming Operations Guide
343