Nortel BCM 3.7 Manual page 854

854 Button programming features
Table 281 Button Programming Feature settings (Continued)
Set command
(FEATURE Feature
<code>)
68 Restriction override
69 Priority Call
70 Transfer
71 Link
72 Timed Release
74 Call Park
*520 Find available SWCA key System will search for a free SWCA key among the SWCA keys that are
*521 to *536
System Wide Call
Appearance (1 to 16)
*537 Find oldest SWCA call
*538 Find newest SWCA call
*550 Silent Monitor
75 Group Pickup
76 Directed Pickup
77 Call Timer
78 Pause
79 Exclusive Hold
800 Trunk Answer
801 Call Queuing
802 Group Listening
803 Time
804 Wait for Dialtone
807 Ringing (Signal) Call
808 Long tones
N0008589 3.3
Description
Allows the user to override any restrictions for the call they are trying to
dial.
Allows the user to access a telephone that is currently busy.
Allows the user to transfer an existing call to another telephone.
Activates the Link command, which allows the user to access special
features on a remote PBX system.
(NOT ACTIVE)
Allows the user to park a call on another telephone in the system.
assigned to the current telephone.
Non-intercom calls are associated with an available SWCA key when the
call is answered or originated, or put on Hold.
Features that interact with this feature: Hold, telephone keys, outgoing
and incoming calls.
System will search among the SWCA keys assigned to the telephone,
and unpark the call that has been parked the longest.
System will search among the SWCA keys assigned to the telephone,
and unpark the call that has been most recently parked.
Monitor hunt group calls. (Telephone must be assigned with SM
supervisor)
Allows the user to answer a call made to another set within the Pickup
group.
Allows the user to answer any telephone that rings within the system.
Allows the user to see how long a call lasted.
Allows the user to insert a pause during a dialing sequence.
Allows the user to put a call on hold at the current telephone. All
appearances of the call on other telephones indicate the line is busy.
Allows the user to answer a ringing call placed in a service mode.
Allows the user to answer calls in order when several calls occur at once.
Calls are presented in this order: incoming calls, timed-out forwarded
calls, then camped calls
This feature opens the microphone on the set to allow a group of people
to hear a call through the telephone speaker, but the user must talk to
the caller through the handset.
Displays the current time.
Places a pause in a dialing string that holds the following digits until a
dialtone is perceived on the line.
Enter FEATURE 807 and an extension to directly ring another telephone
inside the system. This is the same process as pressing an intercom
button and dialing an extension.
Allows the user to specify the type of tones dialed out.