Table of Contents
Advertisement
456
Configuring telco features
Configuring telco features
The Telco features heading allows you to program how the Business Communications Manager
works with the public network or other outside features and services to supply Call Display.
Figure 156 DN Telco Features fields
You can copy the Telco features settings you program on one telephone to other telephones.
Follow these steps to configure Telco features settings:
1
If you are not already in the DN record, click the key beside the telephone DN for which you
want to assign telco features.
2
Click on Telco features.
3
Use the information in the following table to configure Telco features.
Table 93 Telco features settings
Setting
First display
Auto called ID
Set log space
N0008589 3.3
Values
Description
Name
Determine what call display information appears first.
Number
This feature depends on which services you subscribe to. Call
Display information may contain the name of the caller, the number
Line
of the caller, the name of the line in your Business Communications
Manager system that the call is on, or all. For each telephone, you
can determine what information displays first.
Tips: The Call Information feature displays and toggles between the name and line number
for Call Display information.
Unknown number appears on the display if the information is not available from your
telephone company.
You may see Private number on the display if the caller blocks that information.
Alpha tagging: If you are using the alpha tagging feature, choose Name. Refer to
alpha tagging for name display" on page
Y or N
Select whether you want to see the extension number and name of
the telephone you call on your display.
The Auto called ID set for target lines is the same telephone that
has an appearance on that target line.
<amount of space
This setting indicates the amount of space that the user has to store
remaining on the log>
call log items for the telephone. Default: 20.
463.
"Using
Advertisement
Table of Contents
