Table 185 V.90 Modem Summary Parameters; Table 186 Modem Link Parameters - Nortel BCM 3.7 Manual

692 V.90 modem dial up
To configure the V.90 modem interface:
1
On the navigation tree, click the Resources key and click the Dial Up key.
2
Click the V.90 key to see available modem interfaces.
3 Click the ModemBackup heading if you want to configure the interface used for the backup
WAN connection.
Click the ModemTrapDialOut heading if you want to configure the interface used for
sending SNMP trap messages to the SNMP Manager.
The V.90 Summary screen appears.
4 Configure the V.90 Summary parameters according to the information in the following table.

Table 185 V.90 modem summary parameters

Attribute Description
Interface Shows the name of the modem interface selected.
IP Address Enter the IP address of the modem interface when it connects. Users can set a fixed IP address
for the dial-up interface. If a fixed address is specified, Business Communications Manager uses
the address on the receiving end.
Users can select RemoteAssigned to indicate that Business Communications Manager must
obtain an IP address from the remote end and use it. The address obtained depends on the RAS
server to which Business Communications Manager connects.
The default value is RemoteAssigned.
Description Shows a description of the interface.
Version Shows the version of the modem subsystem.
Status View the modem interface resource status and enable or disable the modem interface.
The possible states are:
Connect: The modem is enabled and the dial-up link is currently active.
Disconnect: The modem interface is enabled and the dial-up link is currently disconnected.
Enabled: The modem interface is enabled for use.
Disabled: The modem interface is disabled.
5
Press the Tab key to save the settings.
6
Click the V.90 Link Parameters tab.
The V.90 Link Parameters screen appears.
7 Configure the Modem Link Parameters according to the information in the following table.

Table 186 Modem link parameters

Attribute
Telephone Number
Alternate Telephone
Number
N0008589 3.3
Description
Lets you type a telephone number to use to connect using the modem interface. If
needed, include area codes and all necessary digits to dial an external number.
Lets you type an alternate number to use to connect using the modem interface.
Include area codes and all necessary digits to dial an external number.