Table of Contents
Advertisement
638
Using the Network Update Wizard
Using the Network Update Wizard
When your system is first installed, the data resources are set up when the Quick Start Wizard is
run. Refer to
"Using the Quick Start Wizard" on page
If you need to change any of your system name, LAN, WAN, or dialup settings after your system
has been configured, you can use the Network Update Wizard.
Note: Remember to update your Programming Records when you make any type of changes to
your system.
To update a LAN, WAN or DNS setting:
1
On the first page of the Unified Manager, click the Wizards button.
2
When prompted, enter your system Login name and Password, then click the Login button.
3
Click the Network Update icon.
The first page of the Network Update wizard appears. The information on this page reflects the
actual hardware installed in your system.
4
Fill out the fields for the data information that you want to change.
Refer to
"What you need to know" on page
5
Click Next.
The second page of this wizard is a summary page.
6
Check that the settings are correct.
7
Print out the page or save a copy on your computer to add to your programming records
8
Click Apply.
The system updates the settings.
N0008589 3.3
108.
639.
Advertisement
Table of Contents
