Table of Contents
Advertisement
Viewing Media Bay Module status
Media Bay Modules selection allows you to view the status of all the modules as well as identify
any device or lines connected to the system. This allows you to isolate any malfunctioning part of
the system. In addition, you can use the Media Bay Module selection to disable and enable
modules and devices. For more information, refer to one of the following procedures.
Use this procedure to display module type, the number of sets connected to the module, the
number of busy sets and the module state:
1
On the navigation tree, click the Resources key and click the Media Bay Modules key.
The window displays Bus 02 through to 08.
2
Click heading of the bus you want to view. For example, Bus 02.
The Configuration menu is enabled and the status information of the module associated with
that bus appears.
Disabling/enabling a DS30 bus
The following procedure describes the process for enabling or disabling a bus. This means that if
there is more than one module assigned to the DS30 bus, all modules will be disabled.
1
Click the keys beside Resources and Media Bay Modules.
Buses 01 to 07 are displayed.
2
Click on the bus number of the module you wish to enable/disable (Bus 02 to 07).
3
On the top menu, click Configuration, and then, click Enable or Disable.
The system prompts you to confirm your request.
4
Click the OK button.
Programming reminder: If your system has a 3/5 DS30 split, BUS 07 will not have a module
assigned to it.
Disabling/enabling a single module
The following procedure describes the process for enabling or disabling a single module if there is
more than one module assigned to a DS30 bus.
1
Click the keys beside Resources and Media Bay Modules.
Buses 01 to 07 are displayed.
2
Click on the key beside the Bus number of the module you wish to disable (Bus 02 to 07).
3
Click on the Module number of the media bay module you want to enable/disable.
4
On the top menu, click Configuration, and then, click Enable or Disable.
The system prompts you to confirm your request.
Working with the modules
Programming Operations Guide
159
Advertisement
Table of Contents
