Table of Contents
Advertisement
180
Universal T1 WAN (UTWAN)
Table 23 WAN PVC Configuration parameters (Continued)
Column
DC Retry Time
DC Retry Count
Compression
Broadcast
End to End Frag
Frag Size
6
Click the Save button.
Modifying the PVC Configuration settings
Follow these steps to modify a PVC Configuration setting:
1
On the navigation tree, click the Resources key and click the UTWAN Key.
2
Click the UTWAN1 heading.
The Summary screen appears.
3
Click the PVC Configuration tab.
The PVC Configuration screen appears.
4
Click the entry you want to modify in the PVC Configuration table
5
On the Configuration menu, click Modify PVC Configuration.
The PVC Configuration dialog box appears.
6
Change the PVC Configuration parameters.
7
Click the Save button.
N0008589 3.3
Description
Enter the Data Compression Retry Time is seconds.
The possible values are 1 to 15 seconds.
The default value is 3 seconds.
Enter the Data Compression Retry Count.
The possible values are 1 to 128 retries.
The default value is 10 retries.
Select RTP Header to enable RTP Header compression on this PVC.
Select Data to enable data compression on this PVC.
Select None to disable compression.
Select Enabled to enable broadcast capability on this PVC. When broadcast is enabled,
broadcast messages are sent out over this PVC.
Select Disabled to disable broadcast capability on this PVC.
The default setting is Disabled.
Select Enabled to enable End-to-End Fragmentation on this PVC.
Select Disabled to disable End-to-End Fragmentation on this PVC.
The default setting is Disabled.
Enter the maximum frame size in bytes.
Any packets that have a frame size larger than this value will be fragmented.
The possible values are 200 to 800 bytes.
The default value is 200 bytes.
Advertisement
Table of Contents
