Table of Contents
Advertisement
Figure 12 Business Communications Manager Main Menu
11 Refer to the specific tasks that require this menu for details about using this it.
Manually activating Telnet
If you choose to continue operating the text-based menus with Telnet, rather than using the PuTTY
client, you can manually activate the service from the Unified Manager.
Security note: Using the Telnet interface poses a security risk since the Telnet protocol
!
is not encrypted.
Note: If you are using a cross-over cable to make a direct connection, Hyperterminal is still
enabled, regardless of the status of Telnet on the system.
1
Click the key beside Services.
2
Click on Telnet.
3
On the Telnet screen, change Status to Enabled.
Manually activating Telnet
Programming Operations Guide
89
Advertisement
Table of Contents
