Appendix A - Line Renumbering - Nortel Voice Mail Software Manual

Appendix A - Line renumbering

If your Norstar Voice Mail system is connected to a Modular ICS or Compact ICS,
and you upgrade the ICS software to version 2.0 or greater, you must renumber the
Norstar Voice Mail lines. Line 5 and greater will not be recognized by Norstar
Voice Mail systems connected to a Compact ICS. Line 49 and greater will not be
recognized by a Norstar Voice Mail system connected to a Modular ICS.
Renumbering the Norstar Voice Mail lines is divided into two parts:
• Running the line renumbering utility
• Resetting the Line Answer status
This appendix provides instruction for performing both parts.
Line renumbering can be done from a Norstar two-line display telephone.
Before you start, ensure you have the Line Renumbering Utility diskette.
To run the line renumbering utility:
NEXT
P0994576 Issue 01
1. Press Ä á Ú Þ .
2. Enter the default password ÛÛÛÜààÛ
(ACCESS2).
3. Press ADMIN .
ADMIN
4. Press NEXT until the display shows:
5. Press
SHOW
6. Insert the Line Renumbering Utility diskette into the
INSTL
floppy disk drive of the Norstar applications server and
press
7. The display will continue to show progress as the line
renumbering utility is running.
.
.
Norstar Voice Mail 4.1 Software Upgrade Guide