Advanced Stack Configuration; Advanced Stack Status - NETGEAR S3300 User Manual

Table 25. Basic Stack
Table 26.
Field
Unit ID
Switch Description
Serial Number
Uptime
Preconfigured Model Identifier
Plugged-in Model Identifier
Detected Code Version
Detected Code in Flash
SFS Last Attempt Status
Click Update to update the page with the latest information on the switch.

Advanced Stack Configuration

Advanced > Stack Configuration uses the same screen as Basic > Stack Configuration
described above.

Advanced Stack Status


Use the Stack Status page to display stack protocol information:
1. Click System > Stacking > Advanced > Stack Status.
2. Select either the Unit ID or All.
• Select the Unit ID field to display information for the selected unit.
Select All to display information for all units.
•
S3300 Smart Managed Pro Switch
Status
Description
The Unit ID of the specific switch.
The description for the unit that can be configured by the user.
The unique box serial number for this switch.
Displays the relative time since the last reboot of the switch.
Displays the model type assigned by the device manufacturer to
identify the device.
Displays the model type assigned by the device manufacturer to
identify the plugged-in device.
Indicates the detected version of code on this unit.
Displays the Release number and version number of the code
stored in flash.
Displays the Stack Firmware Synchronization last attempt status.
Configure System Information
83