Authentication List Configuration - NETGEAR GS108T-200NAS Software Administration Manual

Authentication List Configuration

Use the Authentication List page to configure the default login list. A login list specifies one or
more authentication methods to validate switch or port access for the admin user.
Note: Admin is the only user on the system and is assigned to a preconfigured list named
defaultList, which you cannot delete.
To access the Authentication List page, click Security  Management Security, and then click
the Authentication List link.
Figure 5-8
To change the authentication method for the defaultList:
1. Select the check box next to the defaultList name
2. Use the drop down menu in the 1 column to select the authentication method that should
appear first in the selected authentication login list. If you select a method that does not time
out as the first method, such as 'local', no other method will be tried, even if you have
specified more than one method. This parameter will not appear when you first create a new
login list. User authentication occurs in the order the methods are selected. Possible methods
are as follows:
• Local: The user's locally stored ID and password will be used for authentication. Since the
local method does not time out, if you select this option as the first method, no other
method will be tried, even if you have specified more than one method.
Managing Device Security
GS108T and GS110TP Smart Switch Software Administration Manual
v1.0, April 2010
5-13