24-Port and 48-Port Gigabit Ethernet PoE+ Smart Switches with 4 SFP Ports
Back panel
The back panel provides a Kensington lock and AC power receptacle. (The switch
integrates a fixed, internal power supply.) The console port is not for customer use.
The following figures show the back panels.
Figure 3. Back panel models GS728TPv3 and GS728TPPv3
Figure 4. Back panel models GS752TPv3 and GS752TPPv3
Switch hardware interfaces
The following sections describe the hardware interfaces on the switch.
RJ-45 ports for 10/100/1000M BASE-T Ethernet connectivity
All RJ-45 copper ports support autosensing. When you insert a cable into an RJ-45 port,
the switch automatically detects the maximum speed (10 Mbps, 100 Mbps, or 1 Gbps)
and duplex mode (half-duplex or full-duplex) of the attached device. All ports support
a Category 5e (Cat 5e) cable (or higher-rated Ethernet cable) terminated with an 8-pin
RJ-45 connector.
Hardware Overview
17
Hardware Installation Guide