Installation Procedure - Compaq N2400 - TaskSmart - 1 GB RAM Administration Manual

6-62 Compaq TaskSmart N2400 Administration Guide

Installation Procedure

The password synchronization service must be installed on all primary domain
controllers (PDC) and backup domain controllers (BDC) located in a domain,
to support the service. PDCs are the system that contains the primary copy of
the user passwords.
You do not need core SFU components to install the service on a domain
controller. Instead, you can install password synchronization by itself.
NOTE: This procedure does not install SFU.
To install password synchronization on a domain controller:
1. Locate the sfucustom.msi file located in the SFU directory of the
N2400.
2. On the domain controller where the service is being installed, do the
following:
Use Windows Explorer:
a. Open the shared directory containing sfucustom.msi.
b. Double-click the file to open it. Windows Installer launches.
NOTE: If the domain controller used does not have Windows Installer installed, locate the
file InstMSI.exe in the SFU directory and launch it. After this installation, the Windows
Installer program starts when opening sfucustom.msi
c. Click Next when the Welcome to Windows Services for Unix screen
is displayed.
d. Type in the User name and Organization, and then click Next.
e. Accept the license agreement, and then click Next.
f. Select Custom Installation, and then click Next.
g. Add the Will be installed on local hard drive option for Password
Synchronization.
h. Select the installation directory, and then click Next.
i. Click Finish when install is complete.
NOTE: Windows Installer restarts the computer while installing password
synchronization. Before installing password synchronization, be sure to close all
applications and notify users connected that the server is powering down.