Compaq N2400 - TaskSmart - 1 GB RAM Administration Manual page 173

9. Highlight the Windows user and UNIX user that you want to map, and
then click Add.
Figure 4-15. Windows users and UNIX users to map and add for NIS dialog
box
10. Repeat step 10 until you have mapped all of the users.
11. Click Apply at the top of the pane to save changes.
NOTE: The procedures for creating user and group mappings are identical. The list of
Windows and UNIX groups is displayed by clicking Show Group Maps in the Advanced
maps section of the screen and by displaying the Windows and UNIX groups as shown in
the preceding steps.
Integrating UNIX into Windows NT 4-23