Compaq N2400 - TaskSmart - 1 GB RAM Administration Manual page 189

5-6 Compaq TaskSmart N2400 Administration Guide
Remote Insight Lights-Out Edition Board
Configuration
By default, the TaskSmart N2400 appliance comes from the factory with full
remote manageability. The Remote Insight Lights-Out Edition board on the
TaskSmart N2400 appliance is initially configured through the Offline
Configuration Utility (OCU). SNMP is already enabled, the Compaq Insight
Management Agents are preinstalled, and the Remote Insight Lights-Out
Edition board is fully functional.
The Remote Insight Lights-Out Edition board comes with factory default
settings, which the administrator can change. Administrators may want to add
users, change SNMP trap destinations, or change networking settings. Refer to
the Remote Insight Lights-Out Edition Installation and Users Guide for more
information about changing these settings.
There are several methods for performing Remote Insight Lights-Out Edition
board configuration changes:
Initial Remote Insight Lights-Out Edition board access using the default
DNS name
The Remote Insight Lights-Out Edition board is preconfigured by the
Offline Configuration Utility (OCU) CD with a default user name,
password, DNS name, and IP address. These are:
G
USERNAME: Administrator
G
PASSWORD: (last four digits of the serial number)
G
DNS NAME: RIBXXXXXXXXXXXX (The 12 Xs are the MAC
address of the Remote Insight Lights-Out Edition board.)
G
IP ADDRESS:
Web interface
Pressing F8 for the Remote Insight Lights-Out Edition board
configuration utility during a system restart