6-16 Compaq TaskSmart N2400 Administration Guide
7. Select an available storage unit or units (logical drives) to include in
your new pool, and then click the right-pointing arrow button in the
center of the interface to move the drive into your new pool. Repeat this
process for each logical drive that you want to include.
Figure 6-8. Selected Logical Drives dialog box
NOTE: You can have up to eight logical drives as members of a pool.
8. Click Next to proceed.
9. Select the segment size of your pool, noting that this selection
determines the maximum size of a virtual disk that may be created in the
pool. Compaq recommends a segment size of 128 KB.
You can see the total capacity of your new pool displayed at the bottom
of the right pane.
10. Click Next, and then click Finish.