Compaq N2400 - TaskSmart - 1 GB RAM Administration Manual page 270

Disaster Recovery
Disasters that cause the loss of your entire server or server operating system
drives require a complete restoration of the server. The specific procedure for
recovering from a disaster depends on your backup software and the optional
disaster recovery modules that you may have installed. In general, it is
necessary to complete the following functions to fully recover from a disaster:
Use the QuickRestore process to reinstall the TaskSmart system image.
If you made changes to the factory drive array default configuration,
configure your arrays, logical drives, pools, and virtual disks as they
were at the time of the disaster.
Reinstall the backup application.
Add the TaskSmart N2400 appliance into the appropriate domain.
Re-establish user accounts if the TaskSmart is a part of a workgroup.
If the files were retained, re-establish user rights to drives, files, and
directories.
NOTE: Being a part of a domain negates this requirement.
Recover the backup application file and media history databases.
Recover your data from your backup application.
Recover the system state.
Backup Utility Management A-9