Primary Processor Test Error - Compaq N2400 - TaskSmart - 1 GB RAM Administration Manual

C-16 Compaq TaskSmart N2400 Administration Guide
Primary Processor Test Error Codes
Error Code Description
101-XX CPU test failed.
103-XX DMA page registers test
failed.
104-XX Interrupt controller master
test failed.
105-XX Port 61 error occurred.
106-XX Keyboard controller
self-test failed.
107-XX CMOS RAM test failed.
108-XX CMOS interrupt test failed.
109-XX CMOS clock load data test
failed.
110-XX Programmable timer load
data test failed.
111-XX Refresh detect test failed.
112-XX Speed test slow mode out
of range.
113-XX Protected mode test failed.
114-XX Speaker test failed.
116-XX Cache test failed.
Table C-3
Recommended Action
1. Replace the processor and retest.
2. Replace the system board and retest.
Replace the system board and retest.
1. Replace the battery/clock module
and retest.
2. Replace the system board and retest.
Replace the system board and retest.
1. Verify the speaker connection and
retest.
2. Replace the speaker and retest.
3. Replace the system board and retest.
Replace the processor and retest.
continued