Inspect Utility - Compaq N2400 - TaskSmart - 1 GB RAM Administration Manual

Inspect Utility

The Inspect Utility provides configuration information such as the contents of
the operating system startup files, the current memory configuration, the ROM
version, and Integrated Management Log (IML) information. The Inspect
Utility operates with MS-DOS emulation mode of OS/2.
Running the Inspect Utility
1. Power down the server, and then power it back up. Press the F10 key
when the cursor is displayed in the upper right corner of the screen.
2. At the main menu, select Diagnostics and Utilities.
3. Press Enter.
4. Select Inspect Computer, and then press Enter.
NOTE: If Diagnostics is not installed on the hard drive, System Configuration prompts you
to insert the Diagnostics diskette into drive A.
5. Follow the instructions displayed on the screen.
Printing the Inspect listing
Select Print on the Inspect screen to print a copy of the Inspect listing. Keep a
copy of the listing with each server for later reference.
Troubleshooting C-11