Integrated Management Log - Compaq N2400 - TaskSmart - 1 GB RAM Administration Manual

Integrated Management Log

The Integrated Management Log (IML) records system events and stores them
in an easily viewable form. Each event is marked with a timestamp with
one-minute granularity.
Events listed in the IML are categorized as one of four event severity levels:
Status—indicates that the message is informational only.
Repaired—indicates that corrective action has been taken.
Caution—indicates a nonfatal error condition.
Critical—indicates a component failure.
The IML requires operating system-dependent drivers from Compaq. Refer to
the Compaq Support Software CD for instructions on installing the appropriate
drivers.
Viewing the Log
You can view an event in the IML in several ways:
From within Compaq Insight Manager
From within the Compaq Survey Utility
From within the IML Management Utility
Compaq Insight Manager
Compaq Insight Manager is a comprehensive management tool used to
monitor and control the operation of Compaq servers and clients. Compaq
Insight Manager consists of two components: a Windows-based console
application, and server- or client-based management data collection agents.
Starting with Compaq Insight Manager 4.0, the agents for Windows NT and
NetWare are also Web-enhanced; that is, these agents enable Web browser
access and monitoring of management information.
The management agents monitor over 1,000 management parameters. Key
subsystems are instrumented to make health, configuration, and performance
data available to agent software. Agents act upon data by initiating
information, such as statistics on network interface or storage subsystem
performance.
Troubleshooting C-19