Task 4: Connect The Standard Ethernet Cables - Compaq N2400 - TaskSmart - 1 GB RAM Administration Manual

1-8 Compaq TaskSmart N2400 Administration Guide
Task 4: Connect the Standard
Ethernet Cables
Connect the Ethernet cables to the respective Ethernet connectors in
accordance with the information in the "Collect Information for Initialization"
section earlier in this chapter. See Figure 1-5 and Table 1-1 for the locations of
the Ethernet connectors on the server. Use the four ports (Eth 1 through Eth 4)
located on the NIC board before using the Ethernet port (Eth 0) located on the
system board.
1 2 3
6
Figure 1-5. Server Ethernet connectors
4
5